When purchasing Brownells or any other brand from eGoods365.com store, you can be sure that (a) you are purchasing from US based company with the most responsive and friendly customer service; (b) an authentic, not a counterfeit and not a refurbished product.
Acra offers a range of 2-part epoxies that are incredibly strong and can bond with almost any material. These specially formulated, clear-drying epoxies have a resin/hardener ratio of 1-to-1 and set and cure rapidly to provide a rock-solid, almost undetectable repair every time. These epoxies can be used in the field, shop, or at home to mend hundreds of things that would otherwise be thrown away. They are not susceptible to drying out, cracking, or becoming brittle over time, unlike traditional adhesives. Acra-Quick epoxies are also impervious to moisture and chemicals and form an impressively strong, tight bond with metals, woods, ceramics, and plastics.
Acra-Quick's adhesives have the same superior strength and holding power as their Acraglas and Acraglas Gel products. Once set, these epoxies are stuck in place, and they are almost indestructible when they properly cure. Acra understands the value of time and has engineered their chemical hardening process to reduce repair times. Quick-setting Acra-Quick 3-Minute Epoxy has a working time of 2-3 minutes, reaches handling strength in 5 minutes (at 70°F), and cures fully in 24 hours. Acra-Quick Gel epoxies are five-minute epoxies with a slightly longer setup time of 3-5 minutes, achieving full holding strength after 24 hours. For added working time, Acra-20 is the product to use and has a 15-20 minute working time for some repositioning. With this product, it is also possible to color the epoxy with any Acraglas dyes. It reaches handling strength in 60 minutes, full strength in 24 hours, and sets up in temperatures as low as 0°F.
One of the benefits of Acra's epoxies is their consistency. Acra-Quick 3-Minute Epoxy and Acra-20 20-Minute Epoxy products have a semi-fluid consistency similar to that of model glue. They flow well and fill gaps in tight spaces. Acra-Quick Gel 5-Minute epoxies are thicker formulas that don't run, making them ideal for repairs where gravity is working against you.
The advanced molecular structure of Acra epoxies makes them dimensionally stable, ensuring that mended parts remain tight, gaps stay filled, and the repair remains super strong and almost imperceptible for years to come. Additionally, these epoxies resist deterioration and weakening caused by commonplace solvents and detergents, making them chemical-resistant. They're also not susceptible to breaking down in sunlight or frigid temperatures.
Acra's newly developed epoxy cartridges, applicator gun, and mixing tips are easy to use and apply with further efficiency. The auger-type mixing tip blends the incoming resin and hardener to deliver the correct mix and the right amount of resin where it is needed. The heavy-duty applicator gun can be reused multiple times. When you have finished with the mixing tip, you can remove and discard it and cap the cartridge until the next time you need it. Additionally, the mixing tip itself holds approximately one teaspoon of mixed Acra-Quick.
If you are concerned about losing the product when disposing of the mixing tip, you can leave the tip off, squeeze out a little of both parts, and hand-mix for small tasks. It is crucial to remove all residue from the end of the cartridge after use.
